evertz 570DSK-12G-F, User Manual

Page: 15 / 56

570DSK-12G-F
Keyer With Logo Insertion
Page 5
2.5.2. Rear Panel
The rear plate is equipped with eight I/O SFP ports and two RJ-45 network connectors.
The device supports both coaxial SFP3TR-HDBNC-12G SFP (Figure 2-2) and fiber SFP3TR–13–12G
SFP – Evertz Ordering Numbers. A high quality coax cable should be used to help ensure optimum
performance.
Figure 2-2: SFP3TR-HDBNC-12G IO Ports Side and Front Views
Figure 2-3: IO Ports Configuration
The RJ-45 connectors are Ethernet ports used for monitoring and controling of the system. See Section
2.7 for information on connecting to an Ethernet network. See Section 2.8 for information on configuring
the network address of the router.
Ethernet 1: Network port to access the Web interface, VistaLink and a connection to the FTP Server.
Ethernet 2: Network port to access the Web interface, VistaLink and a connection to the FTP Server.
It is both important and good practice that cables are properly supported
and not hanging from the connectors as this can put unnecessary stress
on the connectors and possibly reduces their working life.