evertz 570DSK-12G-F User Manual Download Page 11

Page: 11 / 56

570DSK-12G-F

Keyer With Logo Insertion

Page 1

OVERVIEW

The 570DSK-12G-F is an SDI–oriented Keyer with software–enabled features, which has a downstream

Keyer designed for 3G/4K/UHD applications with logo insertion, capable of HDR processing. Each path

supports 3G/4K/UHD with an external Keyer (from Key/Fill inputs) and an internal logo layer for

animations and static logos. Logos can be stored on a customer provided NAS server or on the card itself

by using FTP.

The 570DSK-12G-F can be externally controlled by VUE – Evertz customizable user interface – and/or

by a third-party automation system over IP.

It is also VistaLINK® capable, offering remote monitoring, control and configuration capabilities via

Simple Network Management Protocol (SNMP).

Features

•

Full 16-bit linear RGB Keyer with video fade-in and fade-out processing.

•

One 3G/4K/UHD external Keyer

•

Video formats: HD/3G Level A and 12G single essence.

•

Insert static or animated logos from NAS storage.

•

Multiple control interfaces and/or third-party automation using IP.

•

Dolby compliant

Network Management

•

Built in VistaLINK® support for remote monitoring and control via SNMP (using VistaLINK® PRO)

Summary of Contents for 570DSK-12G-F

























































Search results

Summary of Contents for 570DSK-12G-F

Reviews:

Related manuals for 570DSK-12G-F

Brands by name

Popular brands

evertz 570DSK-12G-F, User Manual

Search results

Summary of Contents for 570DSK-12G-F

Reviews:

Related manuals for 570DSK-12G-F

Brands by name

Popular brands