evertz 570DSK-12G-F User Manual Download Page 52

Page: 52 / 56

570DSK-12G-F

Keyer With Logo Insertion

Page 42

Figure 5-12: M2100 – Activate Command to Remove Logo Through PVW

The ‘Logo Status’, in the Web interface, will change from ‘logo_name: Cue’ to ‘logo_name: out’

After using ‘GVG_TX_START’ to apply the logo through PGM, the same command can also be used

to remove the logo from PVW, remaining only through PGM output signals.

In case ‘GVG_TX_START’ is used a third time, the logo will be removed from PGM and it will be

displayed once again through PVW.



NOTE: The 570DSK-12G-F supports displaying/removing more than one logo

through the output signals. Therefore, the user can set the same command with

different logo names in ‘Name’ field.



NOTE: The instructions can be saved by clicking in the ‘File’ button and

selecting the ‘Save’/’Save as’ option, which allows the user to deactivate the

logos without adding a new command every time.

Summary of Contents for 570DSK-12G-F

























































Search results

Summary of Contents for 570DSK-12G-F

Reviews:

Related manuals for 570DSK-12G-F

Brands by name

Popular brands

evertz 570DSK-12G-F, User Manual

Search results

Summary of Contents for 570DSK-12G-F

Reviews:

Related manuals for 570DSK-12G-F

Brands by name

Popular brands