evertz 570DSK-12G-F, User Manual

Page: 47 / 56

570DSK-12G-F
Keyer With Logo Insertion
Page 37
5.1.2. Disable Keyer
1)
In order to remove the Keyer only from PVW output signals, select ‘GVG_KEY_ENABLE’ again and
press ‘Step’. The Keyer will remain only through PGM output signals (see step 2 of Section 5.1.1).
2)
In order to
remove
the Keyer from
any output signal
, select
‘GVG_KEY_ENABLE’
in the
‘Command’ option. Although, this time, type ‘0’(zero) in ‘Keyer’. Once the user press ‘Step’, the ‘Keyer
Status’, in the Web interface, will change from "Cue-on" to "Off-air" OR from "On-air" to "Cue-off".
5.2. LOGOS
There are two options to display logos through Preview and Program output signals.
5.2.1. Enable Logos in sequence, from PVW to PGM outputs
1)
Select ‘EVERTZ_MEDIA_CUE’ in the ‘Command’ option, type the name of the logo and press ‘Add’
button, so the command will be moved/stored to the ‘Command List’ on the side of the window, as
Figure 5-7.
Figure 5-7: M2100 – Add Command to Display Logo Through PVW