evertz 570DSK-12G-F User Manual Download Page 50

Page: 50 / 56

570DSK-12G-F

Keyer With Logo Insertion

Page 40

Select

‘EVERTZ_MEDIA_IN’

in the ‘Command List’ and press ‘Step’ button to activate the logo, as

Figure 5-10.

Figure 5-10: M2100 – Add Command to Display Logo Through All Outputs

The logo will be displayed through PGM and PVW outputs (all outputs).

The logo, in the WEB INTERFACE, will change from ‘Out’ to ‘logo_name: In’



NOTE: The 570DSK-12G-F supports displaying more than one logo through the

output signals. Therefore, the user can set the same command with different

logo names in ‘Name’ field.



NOTE: The instructions can be saved by clicking in the ‘File’ button and

selecting the ‘Save’/’Save as’ option, which allows the user to activate the

logos without adding a new command every time.

Summary of Contents for 570DSK-12G-F

























































Search results

Summary of Contents for 570DSK-12G-F

Reviews:

Related manuals for 570DSK-12G-F

Brands by name

Popular brands

evertz 570DSK-12G-F, User Manual

Search results

Summary of Contents for 570DSK-12G-F

Reviews:

Related manuals for 570DSK-12G-F

Brands by name

Popular brands