evertz 570DSK-12G-F, User Manual

Page: 20 / 56

570DSK-12G-F
Keyer With Logo Insertion
Page 10
Figure 2-9: Command Prompt – FTP to the Device
3) Press ‘Enter’ twice. Once the operation is done, type the following commands (Figure 2-10), in order
access the local NAS, where the logos will be stored.
Figure 2-10: Command Prompt – Storage Directory Path
NOTE: The user can choose whether to store the logo into the directory named HD or 4K . In case the
user wants to store in the 4K file, type the command: cd 4K , instead of cd HD. These two files can be
seen using the following command:
Figure 2-11: Tera Term – 4K and HD Directory Location
4) After determining where to store the logos, type ‘put’ and drag the file to the Command Prompt
window, so the directory where the file (.rgb or .json) is stored in the user PC is displayed as shown
inFigure 2-12.
Figure 2-12: Command Prompt – Storage .json File into the Device
5)
Press ‘Enter’ to complete the operation. There will be a message of ‘Operation Successful’ as figure
above.
6) Repeat steps 3-5 to include the other file (.rgb or .json) of the same logo into the device. So, in case
the user have included .json file in steps 3-4,the .rgb fie must be included according to step 6 (or vice-
versa). Otherwise, if only one of the files is FTP into the device, non-stop error messages will be
displayed serially.