evertz 570DSK-12G-F, User Manual

Page: 18 / 56

570DSK-12G-F
Keyer With Logo Insertion
Page 8
2.8. MODULE CONFIGURATION
There are two ways to configure the 570DSK-12G-F serially: through Micro-B USB (located in the front
panel) and through the serial port J24 located on the card’s edge, as shown in Figure 2-5.
Figure 2-5: 570DSK-12G-F card
In order to connect the PC to the serial port on the card’s edge, a serial 7700 upgrade cable is required.
The 7700 upgrade cable, supplied with the 570FR/S570FR frame, is a multi-colored ribbon cable with a
six pin header socket on one end and a female 9 pin D connector on the other end (Evertz part number
WA-S76). This cable is normally in the vinyl pouch at the front of the manual binder. Connect the ribbon
cable to port to J24 and power up the card.
Once the TERA TERM is open, configure the port settings of the terminal program as follows:
Baud
115200
Parity
no
Data bits
8
Stop bits
2
Flow Control
None
Table 2-2: Port Setting Data
1)
When the card is powered-up, the HyperTerminal connection displays boot-up status information
and once completed, ends with the ‘Status Message’ as shown in Figure 2-6.
2) Login with customer/customer credentials.
Figure 2-6: Tera Term – Main Menu