evertz 570DSK-12G-F, User Manual

Page: 30 / 56

570DSK-12G-F
Keyer With Logo Insertion
Page 20
Once the device is done rebooting, login back into the web interface and verify if the firmware was
correctly upgraded.
In case the upgrade failed. Please, repeat the same steps described above.
Otherwise, the user can begin configuring the web interface sections as outlined in the following
chapters.
4.3. DEVICE STATUS
Figure 4-6: WebEASY® - Device Status
4.3.1. Device Status
Application Status:
This parameter indicates the status of the unit.
Temperature: This parameter displays the temperature status of the unit, whether it is running in a
regular temperature range (‘Good’) orif it is running out of range (‘Bad’).
Fan Speed: This parameter displays the fan speed status of the unit, whether it is running in a operating
temperature range (‘Good’) or if it running out of range (‘Bad’).
Uptime: This parameter displays the amount of time that has elapse since the device was powered on.
The format is Days:Hours:Minutes:Seconds.
4.3.2. Operating Status
Keyer Status:
This parameter displays the Keyer status, whether Keyer is not present (‘Off-air’), present
on Preview output signal (‘Cue-on’) or present on Program output signal (‘On-air’).
Logo Status: This parameter displays the logo status, whether logo is not present (‘Out’ or ‘[logo name]:
out’), present on Preview output signal (‘[logo name]: Cue’), or present on Preview and Program output
signal (‘[logo name]: In’)