Eurotrac T13-F, Operation Manual

Page: 58 / 81

Page 58/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
CAUTION
Using filter elements from other manufacturers causes serious damage or failure of the axial piston pump.
Replacing the return suction filter
CAUTION
Only the original Schefflera element 070-200-012 may be used as filter element for the return suction filter
070-200-011. Using filter elements from other manufacturers causes serious damage or failure of the axial piston
pump.
Pressure filter
The pressure filter should be replaced at the following intervals under normal working conditions:
•
50 operating hours after initial commissioning
• 800 operating hours after initial commissioning
• Subsequently every 800 operating hours
All of the oil pumped by the gear pump is passed through the pressure filter before reaching the steering and control
unit. To change the pressure filter, release the clips on the filter and unscrew the hoses. The filter is replaced as a
complete unit.
When fitting the new filter, take care to ensure the correct direction of flow. This is indicated by an arrow on the
housing. The filter must be attached so that the arrow points forward from the rear of the loader. An incorrectly
fitted filter can lead to damage to the gear pump.