Eurotrac T13-F, Operation Manual

Page: 14 / 81

Page 14/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
STANDARD SEAT (W13F)
Weight setting
The seat should be adjusted for the drivers weight by turning the weight
adjustment lever (1) with the driver sitting on the seat. The driver’s weight
is adjusted correctly when the adjusted height position of the height
adjustment handle (at the bottom of the handle) (2) is displayed in the
viewing window. The middle position of the spring travel of the respective
height adjustment is displayed. To prevent damage to health and material,
the setting for the driver's weight must be checked and adjusted
individually before the vehicle is driven.
Height adjustment
The height adjustment can be set to three settings (I, II, III). The respective
height must be set with the driver sitting on the seat. Turn the handle for
seat height adjustment to move the seat upwards or downwards. The seat
position displayed at the bottom of the handle for seat height adjustment
has been set.
I = lowest height position
II = middle height position
III = upper height position
Check and set the weight after every height adjustment.
Seat adjustment forward/backward
Seat adjustment to the front/rear is enabled by lifting the locking lever.
WARNING
Risk of accident!
• Do not operate the locking lever while driving.
• After the adjustment, the locking lever must latch into the desired position with an audible click. It should not
be possible to move the driver seat into another position when it is locked.
• Do not lift the locking lever with your leg or calf.
Fore/aft isolator
The fore/aft isolator improves the absorption of shock impacts (e.g. when
driving at high speed, in rough terrain or with a trailer attached) in the
driving direction by the driver’s seat.
The cushioning effect can be activated or deactivated with the help of the
locking lever.
1 = fore/aft isolator OFF
2 = fore/aft isolator ON