Eurotrac T13-F, Operation Manual

Page: 12 / 81

Page 12/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
4. GENERAL INFORMATION & OPERATING INSTRUCTIONS
4.1 Main components
The loader is a four-wheel drive mini-loader. It contains:
•
3 or 4-cylinder diesel engine
• Hydrostatic travel drive system
• Multi-function operating handle
• 12 Volt electrical system
4.1.1 Engine and pump
The loader is powered with industrial engines, with four stroke cycle and direct injection. The engines are certified
by the manufacturer to meet the more advanced emissions standards.
W11/W12S,W13F Series loader has an automatically variable piston pump.
4.1.2 Motor and drive axle
The front and rear drive axles for the W11 are powered by two hydraulic motor cycloids, and the drive axle contains
differential, reduction gears and axles.
The back drive axle for the W12S/W13F is supplying power to the front drive axle through piston motor driving to
transmission axle.
The front and rear axle of the W13F wheel loader have the function of hub reduction, which can ensure good power
transmission. It also has differential lock, which allows machines to operate properly in poor working conditions.
4.1.3 Braking system
Hydrostatic drive can serve as a driving brake, and be installed on the input of the drive axle as a parking brake.
4.1.4 Wheels and tires
Four bolts are used to fix the tires on the drive wheel. The loader tires are of the pneumatic type which ensures a
smooth ride combined with maximum drawbar pull. Remember to check the pressure of your pneumatic tires
regularly. Uneven tire pressure will not only increase tire wear, but will also decrease tractive performance.
4.1.5 Fuel cell
The fuel cell is integrated in the front frame, and it is equipped with a filler cap and a fuel gauge.
4.1.6 Electrical system
The tractor uses a 12 Volt, automotive type, negative ground, electrical system. The system includes a 60/72 Ah
battery, ignition switch, two headlights, amber flashing light, turn signals, taillight, horn, various gauges and other
circuits.
Machine Tire size Rated pressure
W11 26x12-12AS 300 kpa
W12S 31x15.5-15AS 420 kpa
W12F
W13F/T13F
19.0/45-17 280 kpa