Eurotrac T13-F, Operation Manual

Page: 13 / 81

Page 13/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
4.1.7 Quick removal device
The demolition equipment from the accessories is controlled by a multi-port valve for quick assembly and
disassembly.
4.1.8 Seat
Seats of the loader with seat belts can be adjusted forward and backward. The seat class is EM8. As an option the
loader can be fitted with a comfortable suspended seat.
Driver's seat
The standard driver's seat can be adjusted to the driver's height and weight.
WARNING
Only adjust the driver's seat when the loader is at a standstill. The engine must be switched off.
Armrests
The armrests can be folded up as required and individually adjusted in
height. To adjust the armrests for height, separate the round cap (see
arrow) from the cover, loosen the hexagon nut (size 13 mm) behind it.
Adjust the armrests to the desired position (5-steps) and tighten the nut
again (25 Nm). Replace the cap onto the nut.
WARNING
When the belt roller is fitted, do not install the armrest in the lowest position, otherwise the belt roller might not
function correctly.
Carry out a functional test of the belt roller.
Backrest extension
The backrest extension can be individually adjusted for height by pulling it
upwards over the various increments up to the end stop. To remove the
backrest extension, pull it over the end stop.