Eurotrac T13-F, Operation Manual

Page: 41 / 81

Page 41/81
April 2021 W11 - W12S -W12F - W13F - T13F | Operation manual
Electrical equipment
Do not change the electronic or hydraulic settings as they have been set at the factory. Disconnect the battery to
avoid short circuits when working on the electrical system; this can also prevent unexpected starting when the
engine is running.
Make sure that the battery storage area is well ventilated (remove smoke). The vapors of the charging electrolyte
are explosive. Always keep the battery away from sparks, flame and smoking materials.
Don’t check the battery near the open fire, especially in the battery charging.
Don’t smoke in the area of battery charging.
Welding
Before any welding operations of loader, the specific operation as follows:
Disconnect the battery.
Disconnect the electric control system and electrical equipment.
Connect the ground wire to the welding point.