Eurotech 930150-4003R, User Manual

Page: 97 / 120

PART 2: SOFTWARE CONFIGURATION
97 110150-4002A
The following table lists the options available for the Serial Ports Table . At least one row of the Serial
Ports Table is required for the Terminal Server to operate.
FIELD/OPTION
EXPLANATION
COM Port Select the serial COM port to which the Terminal Server data is sent.
Important:
Make sure this COM port is not configured for another service in
the ZyWAN-G9. Otherwise, both services may conflict for the port
and not operate correctly.
It is possible in some applications to configure two Terminal
Servers to use the same COM port. In order for this to work, the
Demark option must be set to Half Duplex or Broadcast . In Half
Duplex mode, the clients connecting to each port may need to wait
much longer for a response, since the Demark and Response
Timeout times for all connections are observed, in the order that
the requests are received from each client.
Baud Rate
Select the baud rate to use for the Terminal Server port. Baud rate options range
from 1200 to 115,200 bps.
Data Bits
Select the number of data bits to use for the Terminal Server port. Options are 5 , 6 ,
7 , and 8 .
Parity Select the parity to use for the Terminal Server port. Options are None , Odd , Even ,
Mark , Space .
Stop Bits
Select the number of stop bits to use for the Terminal Server port. Options are 1 , 1.5 ,
and 2 .
Flow Control Select whether to use hardware flow control for the Terminal Server port. Options are
None , and RTS/CTS (hardware flow control).