Eurotech 930150-4003R, User Manual

Page: 93 / 120

PART 2: SOFTWARE CONFIGURATION
93 110150-4002A
Chapter 9 Terminal Servers
The following screen capture shows the Terminal Servers tab.
The Terminal Server sets up a listening port for inbound TCP/IP connection, allowing communication
directly to a local serial port.
After setting all the Terminal Server properties, click the
Submit New Configuration button before
switching to a new tab or closing the window.
Note:
Changes made to the Terminal Server page take effect immediately after submitting
changes without requiring a reboot.
To allow one or more Terminal Server services to be configured, set
Enable Terminal Servers to Yes .
This makes the items shown in the following screen capture available in the Table of Terminal Servers .
The following table lists the buttons available in the
Table of Terminal Servers .
BUTTON
EXPLANATION
Insert Row#
Each of the Terminal Servers exists as a large set of properties in a
numbered table row. In order to insert a row in the table, enter a number in
the box between 1 and one greater than the highest number of rows. Then
click the
Insert Row# button to insert a blank row. This row must be filled in
with all data required.
Delete Row#
In order to delete a Terminal Server configuration (a row in the table), enter
a number in the box between 1 and the highest number of rows. Then click
the
Delete Row# button to delete the row. Once a row is deleted, it cannot
be restored without inserting a row and entering the data again.