10
10
TROUBLESHOOTING
If the machine does not work or does not work correctly, consult the
following checklist to see if you can solve the problem yourself. If not, seek
the assistance of qualified personnel.
WARNING
Always check first whether the fault is mechanical or electrical.
Work on and repairs to the electrical system may only be carried
out by trained, authorised service technicians.
Always turn the machine OFF (use the main switch, fig. 4) and disconnect the
power supply before carrying out any repairs. First read the repair
instructions at the beginning of this manual.
10.1
Malfunctions DUST FREE INDUSTRIAL 8500
11
ORDERING SPARE PARTS
Send your order to your supplier and always provide the following
information:
- product name, supply voltage and serial number
(see identification plate)
- item number of the part concerned
- part name
- quantity
Problem
Possible cause
Remedy
Motor does not start
No mains voltage
Check the mains voltage
Main switch defective
Repair or replace the main switch (by Euromate)
Fuse defective
Replace the fuse (by Euromate)
PCB defective
Replace the PCB (by Euromate)
Motor hums, but does not run
Motor is stuck
Free/clean the motor (by Euromate)
Motor stops on its own
Motor defective
Repair or replace the motor (by Euromate)
Insufficient extraction capacity
Fan dirty
Clean the fan (by Euromate)
Filters dirty
Replace the filters. See chapter 8.2.
Suction side air leak
Check or replace the sealing material.
We of
Euromate BV, Minervum 7324, 4817 ZD, Breda, Nederland
hereby declare that:
Product
Dust Free Industrial 8500
Article Number
3180430200
in accordance with the following Directive(s):
2012/19/EC
The
WEEE
Directive
2011/65/EC
The RoHS Directive
2004/108/EC
The Electromagnetic Compatibility Directive
2009/125/EC
Energy related products
2006/95/EC
The Low Voltage Directive
2014/53/EC
RED
Directive
is in conformity with the applicable requirements of the following documents:
IEC60335-2-65:2002 + AMD1:2008 + AMD2:2015
RED Health & Safety
Draft ETSI EN303446-1 V1.1.0 (2017-03)
EMC
EN300
330
V2.1.1
RED
EN300
220-2
V3.1.1
RED
EN
ISO
5801:2008-10 Industrial
fans
Ecodesign for fans No. 327/2011
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications.
The unit complies with all applicable essential requirements of the Directives.
Signed:
Name: Gert Jan Kleinrensink
Position: Director
Place:
Breda
Document
reference:
Date:
29
November
2019
1180461100
EC DECLARATION OF CONFORMITY
