EUROCOM Notebook User Manual Download Page 148

Page: 148 / 158

ATI Video Driver Controls

B - 8 Display Modes

Extended Desktop Mode

The system supports

Extended Desktop

in multiple display environments in

Windows XP

. An Extended Desktop creates a desktop spanning multiple dis-

plays and acts as a large workspace.

To get this effect:

Attach your external monitor to the DVI-Out port (or TV/HDTV to the S-

Video Out port), and turn it on.

Select the

Displays

tab in the

ATI Mobility Radeon Properties

Click the

enable/disable button

for the display device you wish to

use.

Click

Apply

Click

Yes

to accept the settings and

to save the changes.

Use the

Display Properties

(see

“Extended Desktop Monitor

Arrangement” on page B - 9

) window to select the second monitor by

clicking on the icon, or select it from the “

Display:

” pop-up menu.

Click “

Extend my Windows desktop onto this monitor

.”.

Click

Apply > OK

Use the

Display Properties

control panel to drag the monitors to match the

physical arrangement you wish to use.

Summary of Contents for Notebook































































































































































Search results

Summary of Contents for Notebook

Reviews:

Related manuals for Notebook

Brands by name

Popular brands

EUROCOM Notebook, User Manual

Search results

Summary of Contents for Notebook

Reviews:

Related manuals for Notebook

Brands by name

Popular brands