EUROCOM Notebook V12.3.10, User Manual

Page: 71 / 296

Power Management
Power-Saving States 3 - 7
3
Hibernate
Hibernate uses the least amount of power of all the power-saving states and saves
all of your information on a part of the hard disk before it turns the system off. If a
power failure occurs the system can restore your work from the hard disk; if a power
failure occurs when work is saved only to memory, then the work will be lost.
Hi-
bernate will also return you to where you last left off within seconds. You should
put your mobile PC into Hibernate if you will not use the computer for a period of
time, and will not have the chance to charge the battery.
Shut down
You should Shut down the computer if you plan to install new hardware (don’t for-
get to remove the battery and follow all the safety instructions in Chapter 6 ), plan
to be away from the computer for several days, or you do not need it to wake up and
run a scheduled task. Returning to full operation from
Shut down takes longer than
from Sleep or Hibernate .

Silent Mode
You can use Silent
Mode to reduce power
consumption and fan
noise. Use the
Silent
Mode Touch Sensor In-
stant Key to toggle
this mode on/off.
On screen visual indica-
tors
and the
Touch Sensor Instant
Key
will display the
Silent Mode status (see
Table 1 - 2, on page 1 -
8
).
Note Silent Mode may
reduce computer perfor-
mance.
Figure 3 - 3
Start Menu Power