EUROCOM Notebook V12.3.10 User Manual Download Page 35

Page: 35 / 296

Quick Start Guide

Keyboard LED 1 - 11

Keyboard Backlight Application

The

keyboard Backlight application

can be accessed by pressing the

plus

key. Click the

Help

button

in the application to display the configuration keys.

• Click the

Custom

button

to display the three sections of the keyboard which may be configured.

• Click a section of the keyboard and the color buttons will be displayed.
• Click a

color swatch

to apply the color to the selected section when not overidden by any effect applied.

• Click on any of the effect buttons to apply random colors, wave or flashing effects etc (see over).

Figure 1 - 4 - Keyboard Backlight Application

Help Button

Keyboard Sections

Color Swatches

Effects Buttons

Summary of Contents for Notebook V12.3.10









































































































































































































































































































Search results

Summary of Contents for Notebook V12.3.10

Reviews:

Related manuals for Notebook V12.3.10

Brands by name

Popular brands

EUROCOM Notebook V12.3.10, User Manual

Search results

Summary of Contents for Notebook V12.3.10

Reviews:

Related manuals for Notebook V12.3.10

Brands by name

Popular brands