manualshive.com logo in svg

EUROCOM Notebook V12.3.10, User Manual, Page: 117 / 296

Share
Download
EUROCOM Notebook V12.3.10 User Manual Download Page 117

Upgrading The Computer

Upgrading the Hard Disk Drive(s) 6 - 5

6

Upgrading the Hard Disk Drive(s)

The hard disk drive(s) can be taken out to accommodate other 2.5" serial (SATA)
hard disk drives with a height of 9.5mm (h) (see 

“Storage” on page D - 3

). Follow

your operating system’s installation instructions, and install all necessary drivers
and utilities (as outlined in 

“Drivers & Utilities” on page 4 - 1

), when setting up a

new hard disk.

HDD System Warning

New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.

Summary of Contents for Notebook V12.3.10









































































































































































































































































































Reviews:

No comments