manualshive.com logo in svg

EUROCOM Notebook V12.3.10, User Manual, Page: 279 / 296

Share
Download
EUROCOM Notebook V12.3.10 User Manual Download Page 279

NVIDIA Video Driver Controls

SLI Multi GPU Configuration & Power C - 15

C

SLI Multi GPU Configuration & Power

Note that due to the high power and system demands created by enabling an SLI
configuration, 

you should not power the system using the battery only

 and you

will require identical (300W) dual power adapters, connected to a power con-
verter box, to power the system

.

• Only 

enable SLI configuration if the system is powered by identical dual 

power adapters connected by means of the power converter box (factory 
option)

.

• If the computer is currently powered by battery only 

do not enable SLI config-

uration

. 

• If you have currently enabled SLI configuration, and the computer is powered 

by the dual AC/DC adapters, 

do not switch to battery power only

 (or go to the 

NVIDIA Control Panel and disable SLI configuration before switching to bat-
tery power only).

SLI Configuration & 

Multiple Displays

Note that if SLI configu-
ration is enabled only a

Single 

display may be

used as the display de-
vice.

Figure C - 12

 - Dual Power Adapters & Converter Box

Summary of Contents for Notebook V12.3.10









































































































































































































































































































Reviews:

No comments