EUROCOM M120 VOYAGE, User Manual

Page: 79 / 170

Advanced Controls
Enabling Power Options 3 - 23
3
Configuring the Power Button
The power button may be set to send the computer in to either Standby or Hi-
bernate mode ( Figure 3 - 13 ). In Standby mode, the LED will flash
green. In Hibernate mode the LED will be orange if AC Adapter powered, or
will be off if battery powered. If you are in a power saving mode set to save
power through individual components (e.g. hard disk, monitor), the LED will
remain green.
Close Cover
If you have set your
computer to enter
Standby mode when
the lid (“ when I close
the lid of my portable
computer:
”) of the
computer is closed
(the
close cover
switch acts as a sen-
sor to tell when the lid/
LCD panel is closed),
the system will not re-
sume normal operation
when the lid is opened.
Press a key on the
keyboard to resume
operation.
Figure 3 - 14
Power Options
(Advanced - Power
Buttons)
Power Button Sleep/Resume(Sleep) Button Lid
Sleep Button
You may also configure the Sleep/Resume key combination ( Fn + F4) from the
menu illustrated in Figure 3 - 14 . In Windows this is referred to as the Sleep button.