EUROCOM M120 VOYAGE, User Manual

Page: 54 / 170

Using The Computer
2 - 16 Configuring the Infrared Transceiver
2
Configuring the Infrared Transceiver
To configure the computer’s settings for Fast Infrared (FIR) communication
follow these steps:
1. Click Start , point to Settings (or just click Start and click Control Panel )
and click Control Panel .
2. Double-click Wireless Link (in the Printers and Other Hardware
Category ) icon.
3. Click Hardware (tab), and then click Properties (button).
4. Select Advanced (tab).
5. Select “Infrared Transceiver A” and change the Value to “HP HDSL-
2300/3600” .
6. Click OK > OK .
The infrared transceiver may be enabled/disabled in the BIOS (see “FIR Con-
trol: (Advanced Menu)” on page 5 - 9 ).
For further information, please refer to the manual of the device you wish to
connect.
Infrared
Communication
The infrared transceiv-
er operates on a “Line
of Sight”.
Make sure nothing is
blocking the “Line of
Sight” between your
system’s transceiver
and the destination’s
transceiver.