Model 2090 Multi-Device Controller
The lower limit must always be less than or equal to the
upper limit.
USING THE SCAN FUNCTION
The
SCAN
key controls the cyclic motion of the attached
device. The
SCAN
function allows continuous scanning of
devices from one to an infinite number of cycles. The
SCAN
function begins by moving to the closest limit, then,
from that point, the 2090 begins counting cycles. A cycle
is defined as movement from one limit to the other and
back again. The number of cycles that the device will
perform is defined in parameter
P3
. The
SCAN
function
can be terminated by pressing the SCAN button a second
time (same behavior as pressing
STOP
) or by issuing any
other motion command.
©ETS-Lindgren, April 2006
59
Revision G– P#399199
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
