Preparation for Use
Model 2090 Multi-Device Controller
c.
In edit mode (see below), pressing the
LOCAL
key
will shift the display digit being edited to the next
higher digit.
RMT
(REMOTE) indicator
– This indicator will be lit as
long as the corresponding primary device is under remote
GPIB control. The front panel keys (except the
LOCAL
key) of this primary device will be disabled while in remote
mode.
NOTE: While user input and control is disabled, the
remaining keys may still be used to acknowledge an error
condition while in remote control mode.
ADDR
(ADDRESSED) indicator
– This indicator will
strobe to indicate GPIB bus activity while in remote control
mode.
2. CONFIGURATION
PARAM
(PARAMETER) key
– Pressing this key will
stop all device motion and display the current entry of the
configuration parameter list for this primary device in the
corresponding display window. Repeatedly pressing this
key will advance to the next parameter in the list.
3.
LIMIT KEYS AND INDICATORS
UP/CW
key
– Pressing this key will display the upper limit
for the current polarization of a tower, or the clockwise
limit of a turntable, reverberation paddle, or MAPS in the
corresponding numerical display.
UP/CW
indicator
– Lights to indicate that the numerical
display represents the upper limit of a tower, or the
clockwise limit of a turntable, reverberation paddle, or
MAPS.
22
© ETS-Lindgren– April, 2006
Revision G– P# 399199
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
