Model 2090 Multi-Device Controller
SK
Compatibility:
1090, 2090
Description:
Instructs the device to begin seeking for a preset target value. The target (TG)
value must be set prior to issuing the SK command. For a continuous rotation
turntable or tuner, the device will seek the target value by the shortest
possible path. Thus, a seek from 359.9 to 0.0 will rotate clockwise, not
counterclockwise. See the SKN, SKP, and SKR commands for other ways to
control the seek direction.
Devices:
Towers, Turntables
Syntax:
SK
Example:
CALL ibwrt (TowerUD%, "SK")
' Instruct tower boom to seek
' preset target value
CALL ibwrt (TableUD%, "SK")
' Instruct turntable to seek
' preset target value
See Also:
SK 2090, SKN, SKP, SKR, TG, TG?
SK
Compatibility:
2090
Description:
Instructs the device to begin seeking the specified target value. The target
must be located between the current upper/clockwise and
lower/counterclockwise limits. This command is the equivalent of issuing a
target (TG) command followed by a seek preset target (SK) command. For a
continuous rotation turntable or tuner, the device will seek the target value by
the shortest possible path. Thus, a seek from 359.9 to 0.0 will rotate
clockwise, not counterclockwise. See the SKN, SKP, and SKR commands
for other ways to control the seek direction.
Devices:
Towers, Turntables
Syntax:
SK [+/-] XXX[.X]
+
Optional for positive values
-
Necessary for negative values
XXX[.X]
Decimal value for the seek target in centimeters for
towers and degrees for turntables.
In N1 mode .X is ignored
In N2 mode .X is optional.
Leading zeros are optional.
Example:
CALL ibwrt (TowerUD%, "SK 100.0")
' Instruct tower boom to seek
' 100.0 cm
CALL ibwrt (TableUD%, "SK 260")
' Instruct turntable to seek
' 260 degrees
See Also:
SK 1090/2090, SKN, SKP, SKR, TG, TG?
©ETS-Lindgren, April 2006
121
Revision G– P#399199
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com