Eton CXL-150 - SERVICE, Service Manual

Page: 61 / 111

Measure the brake lining thickness.
The minimum limit: 1.5 mm
If they are thinner than the minimum limit,
replace the brake linings.
Measure the brake drum inner diameter.
The maximum limit: 86 mm
Turn the inner race of each bearing with fingers.
The bearings should turn smoothly and quietly.
If the race does not turn smoothly or quietly,
remove and discard the bearings
.
BRAKE PANEL REMOVAL
Disconnect the brake cable from the brake arm.
Remove the brake panel from the knuckle.
61