Eton CXL-150 - SERVICE, Service Manual

Page: 13 / 111

Carefully move the vehicle back, let the wheels have
turned 180 °, so the marks on the tires are aligned
with the axle center height.
Measure the distance between the marks.
Calculate the difference in the front and rear
measurements.
Toe-in: 5±10mm
If the toe-in is out of standard, adjust it by changing
the length of the tie-rods equally by turning the tie-rod
while holding the ball joint.
Tighten the lock nuts.
Torque: 35-43 N.m
2.14 GEAR OIL
Gear oil needs to be changed every year.
STEP1
There is a gear oil release bolt at the rear of engine.
Unscrew this release bolt and can let the dirty oil
flow out. (STEP1)
The re-add oil hole is on the engine case beside gearbox.
STEP2
(STEP2)
13