Eton CXL-150 - SERVICE, Service Manual

Page: 93 / 111

When you will remove the headlight, there are three screws
on the side of light independently. Only remove those
screws first, the headlight just can be pull down.
Than if you want to replace the bulb, you can use the driver
to remove the screw on the front side of light first.
For ERXL-150 (Viper.St)
After you remove the screws on the top of headlight,
it can be take off. Be careful around the headlight, there
are many pins mold on the plastic.
INDICATOR
Remove the handle bar cover
Remove the indicator lamp unit by turning it counter-
clockwise.
Replace a new one
(For RXL-150)
There are two screws on the side of indicator.
93