Eton CXL-150 - SERVICE, Service Manual

Page: 12 / 111

2.11 WHEELS AND TIRES
Inspect the tire surfaces for cuts, nails or other
sharp objects.
Check the tire surfaces at cold tire condition.
*The standard of tire pressure is on chap 1.
2.12 STEERING SYSTEM
Check the free play of the steering shaft with the front
wheels, turned straight ahead.
When there is excessive play, inspect the tie-rod,
kingpin bushing and ball joint.
STEERING SHAFT HOLDER BUSHING
Remove the front fender first.
Remove the steering shaft holder and check the
steering shaft bushing for wears or damage.
If the bushing is worn or damaged, change a new
one.
Grease the steering shaft bushing and install the parts
in the reverse order of removal.
Torque: steering shaft holder bolt: 33 N.m (24 lbf.ft)
2.13 TOE-IN
Let the vehicle on level ground and the front wheels
facing straight ahead.
Mark the centers of the tires to indicate the axle
center height.
Measure the distance between the marks.
12