EtherWAN EX26262, Management Manual

Page: 37 / 326

– 37 –
C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
M
AIN
M
ENU
Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions. The
following table briefly describes the selections available from this program.
Table 4: Main Menu
Menu Description Page
Basic Configuration
1
47
System 47
Information Configures system contact, name and location 47
IP Configures IPv4 and SNTP settings 48
IPv6 Configures IPv6 and SNTP settings 49
NTP Enables NTP, and configures a list of NTP servers 52
Time Configures the time zone and daylight savings time 53
Log Configures the logging of messages to a remote logging
process, specifies the remote log server, and limits the type
of system log messages sent
55
Ports Configures port connection settings 58
Aggregation 124
Static Specifies ports to group into static trunks 125
LACP Allows ports to dynamically join trunks 127
Spanning Tree 131
Bridge Settings Configures global bridge settings for STP, RSTP and MSTP;
also configures edge port settings for BPDU filtering, BPDU
guard, and port error recovery
133
MSTI Mapping Maps VLANs to a specific MSTP instance 137
MSTI Priorities Configures the priority for the CIST and each MISTI 139
CIST Ports Configures interface settings for STA 140
MSTI Ports Configures interface settings for an MST instance 143
MAC Table Configures address aging, dynamic learning, and static
addresses
175