EtherWAN EX26262, Management Manual

Page: 105 / 326

C
HAPTER
4
| Configuring the Switch
Configuring Security
– 105 –
The following buttons are used to edit or move the ACL entry (ACE):
Table 8: QCE Modification Buttons
Button Description
Inserts a new ACE before the current row.
Edits the ACE.
Moves the ACE up the list.
Moves the ACE down the list.
Deletes the ACE.
The lowest plus sign adds a new entry at the bottom of the list.
ACE C
ONFIGURATION
Ingress Port and Frame Type
◆
Ingress Port - Any port, port identifier, or policy. (Options: Any port,
Port 1-10, Policy 1-8; Default: Any)
◆
Policy Filter - The policy number filter for this ACE:
■
Any - No policy filter is specified (i.e., don’t care).
■
Specific - If you want to filter a specific policy with this ACE,
choose this value. Two fields for entering an policy value and
bitmask appears.
◆
Frame Type - The type of frame to match. (Options: Any, Ethernet,
ARP, IPv4; Default: Any)
Filter Criteria Based on Selected Frame Type
◆
Ethernet:
MAC Parameters
■
SMAC Filter - The type of source MAC address. (Options: Any,
Specific - user defined; Default: Any)
■
DMAC Filter - The type of destination MAC address. (Options: Any,
MC - multicast, BC - broadcast, UC - unicast, Specific - user
defined; Default: Any)
Ethernet Type Parameters
■
EtherType Filter - This option can only be used to filter Ethernet II
formatted packets. (Options: Any, Specific (600-ffff hex);
Default: Any)