EtherWAN EX26262, Management Manual

Page: 178 / 326

– 178 –
C
HAPTER
4
| Configuring the Switch
IEEE 802.1Q VLANs
A
SSIGNING
P
ORTS TO
VLAN
S
Use the VLAN Membership Configuration page to enable VLANs for this
switch by assigning each port to the VLAN group(s) in which it will
participate.
P
ATH
Basic/Advanced Configuration, VLANs, VLAN Membership
P
ARAMETERS
These parameters are displayed:
◆
VLAN ID - VLAN Identifier. (Range: 1-4095)
◆
VLAN Name - The name of a VLAN. (Range: 1-32 alphanumeric
characters)
◆
Port Members - Port identifier.
Port overlapping can be used to allow access to commonly shared
network resources among different VLAN groups, such as file servers or
printers. Note that if you implement VLANs which do not overlap, but
still need to communicate, you must connect them through a router.
W
EB
I
NTERFACE
To configure IEEE 802.1Q VLAN groups:
1.
Click Configuration, VLANs, VLAN Membership.
2.
Change the ports assigned to the default VLAN (VLAN 1) if required.
3.
To configure a new VLAN, click Add New VLAN, enter the VLAN ID, and
then mark the ports to be assigned to the new group.
4.
Click Save.
Figure 66: VLAN Membership Configuration