EtherWAN EX26262, Management Manual

Page: 41 / 326

– 41 –
C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
Table 4: Main Menu (Continued)
Menu Description Page
Voice VLAN 189
Configuration Configures global settings, including status, voice VLAN ID,
VLAN aging time, and traffic priority; also configures port
settings, including the way in which a port is added to the
Voice VLAN, and blocking non-VoIP addresses
189
OUI Maps the OUI in the source MAC address of ingress packets
to the VoIP device manufacturer
192
QoS 193
Port Classification Configures default traffic class, drop priority, user priority,
drop eligible indicator, classification mode for tagged frames,
and DSCP-based QoS classification
193
Port Policing Controls the bandwidth provided for frames entering the
ingress queue of specified ports.
196
Port Scheduler Provides overview of QoS Egress Port Schedulers, including
the queue mode and weight; also configures egress queue
mode, queue shaper (rate and access to excess bandwidth),
and port shaper
197
Port Shaping Provides overview of QoS Egress Port Shapers, including the
rate for each queue and port; also configures egress queue
mode, queue shaper (rate and access to excess bandwidth),
and port shaper
199
Port Tag
Remarking
Provides overview of QoS Egress Port Tag Remarking; also
sets the remarking mode (classified PCP/DEI values, default
PCP/DEI values, or mapped versions of QoS class and drop
priority)
200
Port DSCP Configures ingress translation and classification settings and
egress re-writing of DSCP values
203
DSCP-Based QoS Configures DSCP-based QoS ingress classification settings 204
DSCP Translation Configures DSCP translation for ingress traffic or DSCP re-
mapping for egress traffic
205
DSCP
Classification
Maps DSCP values to a QoS class and drop precedence level 206
QoS Control List Configures QoS policies for handling ingress packets based
on Ethernet type, VLAN ID, TCP/UDP port, DSCP, ToS, or
VLAN priority tag
207
Storm Control Sets limits for broadcast, multicast, and unknown unicast
traffic
211
Mirroring & RSPAN
2
Sets source and target ports for local or remote mirroring 212
UPnP Enables UPNP and defines timeout values 218
sFlow Samples traffic flows, and forwards data to designated
collector
220
Monitor 223
System 223
Information Displays basic system description, switch’s MAC address,
system time, and software version
223
CPU Load Displays graphic scale of CPU utilization 224
Log Displays logged messages based on severity 225
Detailed Log Displays detailed information on each logged message 227