EtherWAN EX26262, Management Manual

Page: 174 / 326

– 174 –
C
HAPTER
4
| Configuring the Switch
Power over Ethernet
◆
PoE Mode – The PoE operating mode for a port includes these options:
■
Disabled – PoE is disabled for the port.
■
PoE – Enables PoE IEEE 802.3af (Class 4 PDs limited to 15.4W)
■
PoE+ – Enables PoE+ IEEE 802.3at (Class 4 PDs limited to 34.2W)
◆
Priority - Port priority is used when remote devices require more
power than the power supply can deliver. In this case the port with the
lowest priority will be turn off starting from the port with the highest
port number.
◆
Maximum Power - The maximum power that can be delivered to a
remote device. (Range: 0-34.2 Watts depending on the PoE mode)
W
EB
I
NTERFACE
To configure global and port-specific PoE settings:
1.
Click Advanced Configuration, PoE.
2.
Set the global PoE parameters, including the method used to determine
reserved port power, the method by which port power is shut down,
and the switch’s overall power budget.
3.
Specify the port PoE operating mode, port power allocation priority, and
the port power budget.
4.
Click Save.
Figure 64: Configuring PoE Settings