EtherWAN EX26262 Management Manual Download Page 244

Page: 244 / 326

– 244 –

HAPTER

| Monitoring the Switch

Displaying Information About Security Settings

ISPLAYING

TATISTICS FOR

DHCP S

NOOPING

Use the DHCP Snooping Port Statistics page to show statistics for various

types of DHCP protocol packets.

ATH

Monitor, Security, Network, DHCP, Snooping Statistics

ARAMETERS

These parameters are displayed:

◆

Rx/Tx Discover – The number of discover (option 53 with value 1)

packets received and transmitted.

◆

Rx/Tx Offer – The number of offer (option 53 with value 2) packets

received and transmitted.

◆

Rx/Tx Request – The number of request (option 53 with value 3)

packets received and transmitted.

◆

Rx/Tx Decline – The number of decline (option 53 with value 4)

packets received and transmitted.

◆

Rx/Tx ACK – The number of ACK (option 53 with value 5) packets

received and transmitted.

◆

Rx/Tx NAK – The number of NAK (option 53 with value 6) packets

received and transmitted.

◆

Rx/Tx Release – The number of release (option 53 with value 7)

packets received and transmitted.

◆

Rx/Tx Inform – The number of inform (option 53 with value 8)

packets received and transmitted.

◆

Rx/Tx Lease Query – The number of lease query (option 53 with

value 10) packets received and transmitted.

◆

Rx/Tx Lease Unassigned – The number of lease unassigned (option

53 with value 11) packets received and transmitted.

◆

Rx/Tx Lease Unknown – The number of lease unknown (option 53

with value 12) packets received and transmitted.

◆

Rx/Tx Lease Active – The number of lease active (option 53 with

value 13) packets received and transmitted.

NTERFACE

To display DHCP Snooping Port Statistics:

Click Monitor, Security, Network, DHCP, Snooping Statistics.

Select a port from the scroll-down list.

Summary of Contents for EX26262







































































































































































































































































































































Search results

Summary of Contents for EX26262

Reviews:

Related manuals for EX26262

Brands by name

Popular brands

EtherWAN EX26262, Management Manual

Search results

Summary of Contents for EX26262

Reviews:

Related manuals for EX26262

Brands by name

Popular brands