ETen M500, User Manual

Page: 194 / 210

12-4
Tips
All the names in Contacts will automatically become recognizable
contacts in the “Voice dialing” syntax. However, if the number of
contacts exceeds 1000 entries, the system will not recognize the
excessive entries. To add these entries to Voice Commander for
recognition, tap
Menu
and then
Setting
or run
Voice Commander
Setting
to check and add these contacts manually for voice recognition.
If your volume is too low or if your surroundings are so noisy that the
system cannot recognize your voice, the system will prompt you “Please
say again.” Adjust the distance between yourself and your Pocket PC or
reduce the noise and try again.
Tips
If the user has a heavy accent that may cause poor voice recognition, use
any of the following methods to train the personal digital adapted model in
order to increase recognition:
1.
Tap
Menu
,
Setting
, and then the
Digit Training
tab.
2.
Tap Voice Commander Setting and then the Digit Training tab.
Tips
You can also tap
Voice Commander
,
Menu
, and then
Exit
to end
Voice
Commander
.
If you open another program while using Voice Commander and it
covers the
Voice Commander
screen,
Voice Commander
will terminate
automatically.