Basic safety information
Doc. no. MA007828_00
6 / 34
EN
2
Basic safety information
2.1 Intended use
The ESYLUX Touch wall-mounted detector is intended for indoor use. It can
only be used in rooms with higher levels of humidity such as bathrooms or
cellar spaces if used in combination with the ESYLUX cover IP 44 (item
number EM10055157).
The intended use also includes all functions described in these instruc-
tions.
The device may only be operated if it is secured with a 10-A circuit break-
er. In the PD-C 180i/16 Touch (CH) models, the D1/D2 input must also be
protected with the 2-A circuit breaker.
2.2 Liability and damages
This product is designed only for its intended purpose, which is described
in the corresponding section of these instructions. The device must not be
changed, modified or painted — doing so will void any warranty claims.
The manufacturer will not accept any liability for instances of personal inju-
ry or property damage caused by improper use.
2.3 Safety instructions
Electrical devices connected to a 230V supply voltage may only be assem-
bled and commissioned by electrical installation technicians or trained
electricians, in consideration of country-specific regulations.
DANGER!
Risk of fatal injury from electric shock!
The following five safety rules must always be observed:
1. Disconnect the power supply
2. Secure the power supply from being switched on again
3. Check that the relevant components have been de-energised
4. Set up the earthing and short-circuiting mechanisms as required
5. Cover or isolate neighbouring live parts
3
Product description
3.1 Introduction
The ESYLUX wall-mounted detectors in the MD-C 180i Touch-/PD-C 180i
Touch plus series are passive infrared detectors that react to moving heat
Specialist per-
sonnel!
