Mobil-PDi/MDi remote control
Doc. no. MA007828_00
29 / 34
EN
•
the
button twice, so that the detector can be switched on by
short touch and the program cannot be changed with a long touch.
The LED lights up in white.
•
the
button so that the detector can be switched on and off by
short touch and it is possible to change the program after a long touch.
The purple LED goes out briefly.
4. Press the
button.
The dark blue LED is lit.
5. Press the
button to exit programming mode.
The required touch commands are saved.
7.3.5 Setting the detector sensitivity
If the detector switches the lighting on even if no persons are present in the
field of detection, this may be due to moving objects such as curtains in an
open window. In this case, it can be helpful to reduce the sensitivity of the
detector. If you change the detector sensitivity, the new settings is valid for
all programs.
To set the detector sensitivity:
1. Press the
button to activate simple programming mode.
The dark blue LED is lit.
The detector goes into programming mode.
2. Press the
button to begin adjustment of the sensitivity.
3. Click
• the
button for the detector to work with maximum sensitivity.
• the
button for the detector to work with 75% sensitivity.
• the
button for the detector to work with 50% sensitivity.
• the
button for the detector to work with minimum sensitivity.
4. Press the
button to exit programming mode.
The detector sensitivity is set.
7.3.6 Setting the microphone
The microphone can be useful for supporting presence detection, particu-
larly in non-square rooms. It is switched off in the factory setting. If you
activate the microphone, it is active in all programs.
To ensure that the lighting is not switched on unnecessarily due to noises in
neighbouring rooms, you can adjust the sensitivity of the microphone.
Short: On.
Long:
no function
Short: on/off.
Long:
Program selection
