Essilor Neksia, User Manual

Page: 66 / 84

Remove the screw and washer taking care not to drop them into the trough.
Remove the chamfering wheel.
You can access the grooving wheel.
Replace the desired wheel. Replace the second wheel.
• Grooving wheel: the boss is rotated towards the right.
• Chamfering wheel: is equipped with a positioner to prevent incorrect insertion.
Put the washer and the screw back in and then tighten as much as possible.
If you took the drill bit out of the chuck, put it back.
Remove the keys and press .
The module goes back into its initial position.
The wear statistics for the replaced tool are reset to zero.
5. M
AINTAINING AND CLEANING THE EDGER
This section describes the procedures for servicing and cleaning the digital system:
• Precautions required
(
F
p.66)
• Cleaning the door and GCD module
(
F
p.67)
• Dress the wheels
(
F
p.70)
a. Precautions required
Neksia > v1.0 - 02.14
66
U
SER
M
ANUAL
> IV. M
AINTENANCE
&
SERVICING
>
>
3
4
5
6
7
8