Essilor Neksia, User Manual, Page: 35 / 84

Press to release the lens.
If necessary, retouch the lens.
Otherwise, start edging the second lens. Select the lens directly on screen, on the left or right of the
work area.
The edging screen for the second lens is displayed. All finishes chosen and the modifications made
are kept.
4. F
LAT
-
EDGE FINISHING
For a flat-edge finish, only automatic mode is accessible.
Call the desired shape located on the tracer.
The shape is displayed on the edger work screen.
Select lens material.
Press to select the flat-edge finish.
Choose the type of cycle.
Choose whether or not to polish and/or chamfer your lens.
For more information, refer to the section Edging a lens > Polishing
(
F
p.39)
and Edging a lens >
Chamfering
(
F
p.40)
.
Press .
The door closes, the lens is clamped and then felt.
The edging cycle starts.
When the edging cycle is finished, the retouch screen is displayed.
Press to release the lens.
U
SER
M
ANUAL
> II. E
DGING A LENS
35
Neksia > v1.0 - 02.14
>
>
>
>
>
5
6
1
2
3
4
5
6
7