Essilor Neksia, User Manual, Page: 53 / 84

c. Press on to confirm.
Once the change has been made, press to return to the work screen.
d. Adjusting the chamfer
After edging a lens, if a chamfer always seems too small or too big, you can adjust its size according to the
lens material.
To access that menu from your edger work screen, select > > .
The following screen is displayed:
1. Chamfer
◦ Small, front surface
◦ Large, front surface
◦ Small, rear surface
◦ Large, rear surface
2. Lens materials
◦ Plastic
◦ Polycarbonate
◦ MHI
◦ Trivex TM
◦ Tribrid TM
◦ Glass
3. Increasing or reducing the default chamfer
a. Press the value to be modified.
> The numeric keypad is displayed.
b. Enter the new value.
◦ Negative value: the chamfer will be smaller
◦ Positive value: the chamfer will be larger
c. Press on to confirm.
U
SER
M
ANUAL
> III. C
ONFIGURING THE EDGER
53
Neksia > v1.0 - 02.14