Essilor Neksia, User Manual

Page: 54 / 84

Once the change has been made, press to return to the work screen.
e. Adjusting the groove
After edging a lens, if the width or depth of the groove always seem too close too small or too big, you can
adjust them.
To access that menu from your edger work screen, select > > .
The following screen is displayed:
1. Adjusting the default groove width
◦ Press to reduce the width of the groove.
◦ Press to increase the width of the groove.
2. Adjusting the default groove depth
◦ Press to reduce the depth of the groove.
◦ Press to increase the depth of the groove.
Once the change has been made, press to return to the work screen.
3. R
ESTORING THE FACTORY SETTINGS
At the bottom right of certain settings screens, the button can be used to restore the factory
parameters of the page.
• Press to cancel and go back to the settings screen.
• Press to confirm the reset.
Neksia > v1.0 - 02.14
54
U
SER
M
ANUAL
> III. C
ONFIGURING THE EDGER