Page 47
1.
To edit a Processing Definition click on the “Edit Processing Definition”
link within the Vessel View (found just underneath the “Launch New
Analysis Job” link).
2.
The “Processing Definition Search” window opens, allowing Users to
search for their desired Processing Definition. Double-click the Processing
Definition or click the “Select” button (located on the lower right of the
window) to open.
3.
Users can edit and “Preview” as outlined in 7.5.2.2. Once satisfied with
the changes, Users can either “Save” the Processing Definition or rename
it as a New Processing Definition (“Save As”).
NOTE:
If a Processing definition has been edited, Users may need to
update their Analysis Jobs performed using the edited Processing
definition. This will ensure that data is consistently masked with the
same parameters.
7.5.2.5
Edit Image Collection
Once an Image Collection is generated, the User can edit its contents.
1.
To edit an Image Collection click on the “Edit Image Collection” link
within the Vessel View (found just underneath the “Edit Processing
Definition” link).
2.
The “Image Collection Search” window opens, allowing Users to search
for their desired Image Collection. Double-click on the desired Image
Collection or click the “Select” button (located on the lower right of the
window) to open.
3.
Users can review images that are contained within the Image Collection
by using the Image Stack forward
and reverse
buttons. Users can
remove an image by clicking on the “Remove Image Stack” button found
on the lower left-corner of the window.
4.
Use the “OK” button in the lower right-hand corner to save changes.
Alternatively, use the “Cancel” button to undo any changes made to the
Image Collection.
7.6 Graphing and Exporting Data
7.6.1 Create a
Graph
After scanned images have been analyzed, they can be used to generate graphs of the
selected metric over time. The IncuCyte™ graphing feature can be accessed in the Vessel
View window by either selecting the “Graph” tab and then click on the “Graph/Export”
button or by choosing the Graph/Export option from the Utilities pull-down menu.
