12
Kongsberg XN / iPC 2.0
99
8
Apply small quantities of grease to the threads
of the
chuck
, and to the outer cone and
cylindric surface of the chuck (green arrows).
Avoid the clamping area (red arrow).
Do not use oil, as it could enter the clamping
area and reduce the clamping force.
9
Torque up the chuck by hand, using the
Chuck
Tool
with a
Dummy Bit
.
Hold the rotor with the 17 mm key.
10
Close the
chuck
on a
Dummy Bit
.
11
Chuck Maintenance Kits
are available in the
Esko Store
on www.esko.com.
