12
Kongsberg XN / iPC 2.0
112
Note:
In Q1/2017, the strong springs used earlier were replaced by a set of softer springs, in
order to avoid the foot scratching the material surface.
If needed, a set of strong springs, together with a replacement procedure, is available in the
tool kit included in the shipment.
12.12
Laser Pointer
The
Laser Pointer
(L in the illustration)
is a Class II laser beam pointing device.
Wavelength: 650 nm, 1 mW.
The
Laser Pointer
is used in adjustment
wizards and job execution to indicate current
position on the table.
The
Laser Pointer
is lit as long as it indicates
the correct current position.
If there is no manual operation of the table,
the
Laser Pointer
will be switched off after a
30 sec. time out. Pressing any button on the
Operators Panel
will switch the
Laser Pointer
on again.
