ERL L-PRO 4000, User Manual

Page: 277 / 406

Appendix F DNP3 Device Profile
D02706R02.30 L-PRO 4000 User Manual Appendix F-7
1.4 Link Layer Capabilities Current Value
If configurable,
list methods
1.4.1 Data Link Address:  Fixed at______
 Configurable, range 1 to 65519
 Configurable, selectable from ____,____,____
 Configurable, other, describe______________
1 L-PRO Offliner
1.4.2 DNP3 Source Address
Validation:  Never
 Always, one address allowed (shown in 1.4.3)
 Always, any one of multiple addresses allowed
 (each selectable as shown in 1.4.3)
 Sometimes, explain________________
1.4.3 DNP3 Source
Address(es) expected
when Validation is
Enabled:  Configurable to any 16 bit DNP Data Link
Address value
 Configurable, range _______ to _______
 Configurable, selectable from ____,____,____
 Configurable, other, describe______________
NA
1.4.4 Self Address Support
using address 0xFFFC:  Yes (only allowed if configurable)
 No
NA
1.4.5 Sends Confirmed User
Data Frames:  Always
 Sometimes, explain _____________________
 Never
 Configurable, either always or never
L-PRO Offliner
(to disable, set
Data Link Time-
out to 0)
1.4.6 Data Link Layer
Confirmation Timeout:  None
 Fixed at __ ms
 Configurable, range 0 to 2,000 ms
 Configurable, selectable from____________ms
 Configurable, other, describe______________
 Variable, explain _______________________
500
1.4.7 Maximum Data Link
Retries:  Never Retries
 Fixed at 3
 Configurable, range ________ to _______
 Configurable, selectable from ____,____,____
 Configurable, other, describe______________
3
1.4.8 Maximum number of
octets Transmitted in a
Data Link Frame:  Fixed at 292
 Configurable, range ________ to _______
 Configurable, selectable from ____,____,____
 Configurable, other, describe______________
292
1.4.9 Maximum number of
octets that can be
Received in a Data Link
Frame:  Fixed at 292
 Configurable, range ________ to _______
 Configurable, selectable from ____,____,____
 Configurable, other, describe______________
292