ERL L-PRO 4000, User Manual

Page: 108 / 406

5 Data Communications
5-2 L-PRO 4000 User Manual D02706R02.30
The data points available for DNP SCADA interface are user configurable.
Complete details regarding the DNP3 protocol emulation and data point lists
can be found in “DNP3 Device Profile” in Appendix F
SCADA
Configuration
and Settings
The parameters for SCADA communications may be defined using L-PRO
4000 Offliner.
If DNP3 LAN/WAN communications were chosen, the relay’s network pa-
rameters need to be defined. This is done via the Maintenance interface. Note
that this effort may already have been completed as part of the steps taken to
establish a network maintenance connection to the relay.
1. Establish a TUI session with the relay and login as maintenance . The fol-
lowing screen appears.
Figure 5.1: L-PRO 4000 System Utility