ERL L-PRO 4000, User Manual

Page: 26 / 406

2 Setup and Communications
2-4 L-PRO 4000 User Manual D02706R02.30
Uncheck the option “Search removable media (floppy, CD-ROM.)”.
Check the option “Include this location in the search”.
Browse for the following folder:
C:\WINDOWS\tiinst\TUSB3410
In the window
“Hardware Installation”
“The software you are installing for this hardware”
“ERLPhase 4000 Series Device”
“has not passed Windows Logo testing to verify its compatibility with
Windows XP” or “Windows can’t verify the publisher”
Hit
Continue Anyway .
In the window
“Completing the Found New Hardware Wizard”
“The wizard has finished installing the software for”
“ERLPhase 4000 Series Device”
Hit Finish .
To verify the installation was successful, and to which comm port is the ERL-
Phase 4000 Series Device configured, do the following:
In Windows XP
Start > Control Panel->Performance and Maintenance->System >Hard-
ware > Device Manager > Ports
or (if using Control Panel’s Classic View)
Start > Control Panel > System > Hardware >Device Manager >Ports
In Windows 7 ‘small icons’ view, go to
Start>Control Panel>Device Manager>Ports.
Look for the port number associated to this device.
“ERLPhase 4000 Series Device”
Look for a COM#, where “#” can be 1, 2, 3, etc. Leave the default settings
for this port.
It is recommended to restart the PC after the USB driver installation.
The default baud rate for the relay USB Port 150 is 115200, however to double
check it login to the relay display and go to:
Main Menu > System > Relay Comm Setup