CARDIO LINE 4000 S/S MED/MED/SP/S SP
CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved -
© 2018
by ERGO-FIT GmbH & Co. KG
9.2
Cleaning
Sweat, dust and dirt can damage your exercise equipment even after a few weeks. Metal and
aluminum surfaces may deteriorate when getting into contact with sweat. Therefore you
should clean the equipment every day.
We recommend “Ecolab P3-steril” or “Scarabig” for cleaning. You can obtain these detergents
at the following suppliers:
Ecolab Deutschland GmbH
Reisholzer Werftstraße 38-42
Postfach 13 04 06
D-40554 Düsseldorf
www.ecolab.com
SCARAPHARM chem.-pharm. Produkte GmbH
Wachmannstraße 86
D-28209 Bremen
www.scarapharm.de
Consider the following aspects for cleaning:
⊗
Make sure to disconnect the mains plug before cleaning your machine!
⊗
Clean your machine with a damp cloth, mild cleaning agent or soap and dry it with
a soft cloth.
⊗
Do not apply oil or grease to the external parts of the machine.
⊗
For the TRAC model the internal components should also be cleaned. To do so,
remove the 7 screws on the front cover. Pull the cover up to remove it. Make sure
not to damage the automatic circuit breaker. Remove any dirt inside the treadmill
with a vacuum cleaner, in particular on the ventilation grille of the drive motor.
During training with chip card regularly clean the chip cards and chip-card readers with a
cloth and isopropanol. Special cleaning sets are also available with ERGO-FIT.
9 3
